RESEARCH PAPER PUBLICATION
| Academic Year | SCI | Scopus | Others | Total Research Paper |
|---|---|---|---|---|
| 2025-26 | 1 | 8 | 7 | 16 |
| 2024-25 | 2 | 2 | 12 | 16 |
| 2023-2024 | 4 | 4 | 7 | 15 |
| 2022-2023 | 1 | 5 | 9 | 15 |
| 2021-2022 | 2 | 2 | 7 | 11 |
| 2020-2021 | 2 | 4 | - | 6 |
| Total | 14 | 15 | 28 | 57 |
FACULTY PUBLICATIONS A.Y.2025-26
| S.No. | Authors | Article Title | Journals Name | ISSN | SCI / Scopus / UGC Care |
|---|---|---|---|---|---|
| 1 | Dr R. Sanjeev Kumar Dr A. Gopichand Dr R. Lalitha Narayana |
Inhibition of Corrosion on Mild Steel by Green Synthesized Titanium Dioxide Thin Film | Journal of Environmental Nanotechnology | 2279-0748 / 2319-5541 | Scopus |
| 2 | Dr P. Satyanarayana Raju | RCWA-based Investigation of Incident Wavelength Effects on Amorphous Silicon Thin-film Solar Cell | Journal of Environmental Nanotechnology | 2279-0748 / 2319-5541 | Scopus |
| 3 | I Ravi Kishore N Bulli Raju V Rambabu S Surendar |
Design and Development of a Dual-Mode Floor Cleaning Four Wheel Robots with Manual and Automated Functionality | AIP Conference Proceeding | 1551-7616 / 0094-243X | Scopus |
| 4 | Dr D Bhanuprakash | Multi objective optimization technique to optimize process parameters of EDM for Al alloys using Taguchi with GRA and TOPSIS method | Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology | 1221-4639 / 2668-6163 | Scopus |
| 5 | Dr R. Lalitha Narayana | Physical and mechanical performance of surface treated areca fiber and nano alumina reinforced epoxy composites | Materials Physics And Mechanics | 1605-8119 / 1605-2730 | ESCI / Scopus |
| 6 | Dr R. Lalitha Narayana | Formability of AA6061-AA2017 dissimilar FSW joints: effects of weld passes, material positioning, and post-weld shot peening | Engineering Research Express | 2631-8695 | ESCI / Scopus |
| 7 | Dr R. Sanjeev Kumar | Development of stir-cast al 6063 hybrid composites with 5 Wt.% fly ash and varying SiC reinforcements for improved mechanical and impact properties | Interactions | 3005-0731 | Scopus |
| 8 | Dr P. Satyanarayana Raju | Sol-gel derived TiO2–SiO2 hybrid nanostructures for thermal management, photocatalysis, and composite reinforcement | Materials Research Innovations | 1433-075X / 1432-8917 | Scopus |
| 9 | Dr M. Francis Luther King | CFD Analysis of thermos-hydraulic performance in parabolic trough receiver with porous inserts | Journal of the Brazilian Society of Mechanical Science and Engineering | 1678-5878 / 1806-3691 | SCI |
FACULTY PUBLICATIONS A.Y.2024-25
| S.No. | Authors | Article Title | Journals Name | ISSN | SCI / Scopus / UGC Care |
|---|---|---|---|---|---|
| 1 | Dr R Sanjeev Kumar | Sol-gel spin-coated Transparent Double layered and eco-friendly TiO2 thin films using Banana (Musa Acuminata) leaves extract for anti-reflection coating (ARC) | Journal of Materials Science: Materials in Electronics | 1573-482X / 0957-4522 | SCI |
| 2 | Dr Francis Luther King | Stir Casting Synthesis and Evaluation of SiC Nanoparticle-Reinforced AZ31 Magnesium Alloy Nanocomposites | SAE Technical Paper | 0148-7191 | Scopus |
| 3 | B. Srinivas Dr A Gopichand |
A study on the utilization of Graphene based nanofluids to enhance heat transfer in double pipe heat exchangers | Australian Journal of Mechanical Engineering | 2204-2253 / 1448-4846 | SCI |
| 4 | Dr Francis Luther King | Sol-gel synthesis and spin coating of Ag-doped titania thin films on the glass substrates for photochromic and hydrophilic applications | AIP Conference Proceedings | 1551-7616 / 0094-243X | Scopus |
FACULTY PUBLICATIONS A.Y.2023-24
|
S. No |
Authors |
Article Title |
Journals Name |
ISSN |
SCI / Scopus/ UGC Care |
|
1 |
Dr. R Sanjeev Kumar and Dr. A Gopichand |
Synthesis and evaluation of silicon dioxide nanoparticle coating as corrosion inhibitor for mild steel |
Journal of Mechanical Science and Technology |
1738-494X / 1976-3824 |
SCI |
|
2 |
P Satyanarayana Raju and Dr. A Gopichand |
Inexpensive production of hydrophobic and corrosion resistance titania-silica composite coating for deep water sandwich pipe applications |
Australian Journal of Mechanical Engineering |
1448-4846 |
SCI |
|
3 |
Dr. M.Francis Luther |
Enhancement of corrosion resistance of CrMoV low alloy steels using cryogenic treatment |
Engineering Research Express |
2631-8695 |
SCI |
|
4 |
Dr. M.Francis Luther |
Corrosion Characterisation of Low Alloy CrMoV Steel Before and After Cryogenic Heat Therapy |
Journal of Polymer & Composites |
2321-8525 / 2321-2810 |
SCI |
|
5 |
Dr. M.Francis Luther King |
Cryogenic Treatment of Chromium–Molybdenum–Vanadium Steels: Unveiling Microstructural Features and Improved Mechanical Properties |
Journal of The Institution of Engineers (India): Series D |
2250-2122 |
Scopus |
|
6 |
P Satyanarayana Raju and Dr. A Gopichand |
Optimization of sandwich pipes for deep water applications: An designing approach |
Materials Today: Proceedings |
2214-7853 |
Scopus |
|
7 |
Dr. A Gopichand |
Inexpensive hydrophobic and infrared reflective coating on the cotton and silk fabrics using sol gel dip coating technique |
Materials Today: Proceedings |
2214-7853 |
Scopus |
|
8 |
Dr. A Gopichand, Dr. M.Francis Luther King, Dr. R.Lalitha Narayana |
Synthesis of silver oxide nanoparticles using gomutra mediation and their investigation on anti oxidant property |
Materials Today: Proceedings |
2214-7853 |
Scopus |
|
9 |
Dr. R Sanjeev Kumar, S Surendar and L Ravi Kishore |
Design And Analysis of Car Wheel Rim With Composite Materials |
Indian Journal of Technical Education |
0971-3034 |
UGC Care1 |
|
10 |
Dr Dolla Bhanu Prakash, V Durga Rao and R V Manikanta |
Fabrication of blade system stirrer setup for stir casting |
Juni Khyat |
2278-4632 |
UGC Care1 |
|
11 |
B Srinivas, G Veerendra Kumaar and Saravanan M |
Fabrication of solar water pump for gardening |
Journal of Management and Entrepreneurship |
2229-5348 |
UGC Care1 |
|
12 |
B Mahesh Krishna, B Harita and Ch Uma Mahesh |
Earing and Fabrication using Additive manufacturing and FEM |
Indian Journal of Technical Education |
0971-3034 |
UGC Care1 |
|
13 |
Ch Harish Kumar, Abdul Azeez and Kollu Srinivasa Rao |
Kinematic Analysis of 4R Robot Manipulator using Roboanalyzer and CProg |
Indian Journal of Technical Education |
0971-3034 |
UGC Care1 |
|
14 |
Dr. G Robert Singh, John Bunyan V and Chirapa Srinivas |
Fabrication of dichlorination and thermal cracking equipment for PVC electrical cables |
Journal of Management and Entrepreneurship |
2229-5348 |
UGC Care1 |
|
15 |
N Bulliraju, V Rambabu and P Saranya |
Performance Enhancement Of Passive Solar Still With Paraffin Wax |
Juni Khyat |
2278-4632 |
UGC Care1 |
FACULTY PUBLICATIONS A.Y.2022-23
|
S. No |
Authors |
Article Title |
Journals Name |
ISSN |
SCI / Scopus/ UGC Care |
|
1 |
Dr. R.Sanjeev Kumar |
Influences of various natural fibers on the mechanical and drilling characteristics of coir-fiber-based hybrid epoxy composites |
Engineering Research Express |
2631-8695 |
SCI
|
|
2 |
Dr. G. Robert Singh and Dr. Francis Luther King |
An experimental study on friction stir processing of aluminium alloy (AA-2024) and boron nitride (BNp) surface composite |
Materials Today: Proceedings |
2214-7853 |
Scopus |
|
3 |
P Satyanarayana Raju and Dr. A Gopichand |
Strength and corrosion characteristics of sandwich pipes for deepwater applications |
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems |
1006-5911 |
Scopus |
|
4 |
Dr. R.Sanjeev Kumar |
Influences of Fabrication Parameters on Natural Fiber Reinforced Polymer Composite (NFRPC) Material: A Review |
Materials Science Forum |
0255-5476 |
Scopus |
|
5 |
Dr. M. Francis Luther King |
Thermal performance of a double-glazed window integrated with a phase change material (PCM) |
Materials Today: Proceedings. |
2214-7853 |
Scopus |
|
6 |
Dr. M. Francis Luther King |
Acrylic Rubber-Reinforced Halloysite Nanotubes/Carbon Black Hybrid Fillers for Oil Seal Applications: Thermal Stability and Dynamic Mechanical Properties |
Advances in Materials Science and Engineering |
1687-8442 |
Scopus |
|
7 |
Dr .R. Sanjeev kumar Dr .A.Gopichand B. Mahesh Krishna P.S.N Raju |
Design and printing of foldable helmet using 3D printer |
Industrial Engineering Journal |
0970-2555 |
UGC Care1 |
|
8 |
B. Mahesh Krishna Dr .A.Gopichand CH. Harish kumar. Dr .R Lalith narayana. |
Design of solar electrical scooter using fusion 360 |
Industrial Engineering Journal |
0970-2555 |
UGC Care1 |
|
9 |
V.John Bunyan Dr. Francis Luther King, Dr.A.Gopichand Dr. D. Bhanu Prakash |
Computational fluid dynamic analysis on rocket nozzle using Ansys |
Industrial Engineering Journal |
0970-2555 |
UGC Care1 |
|
10 |
Dr. R. Lalitha Narayana. Dr.A.Gopichand, Dr.D. Bhanu prakash. P.S.N Raju Dr.G.Robert Singh Dr. R. Sanjeev Kumar |
Experimental investigation of passive solar still with coated copper fins |
Journal of fundamental & comparative research |
2277-7067 |
UGC Care1 |
|
11 |
Ravi Kishore L, Chirapa Srinivas, Kolluru Ramakrishna |
An Autonomous UAV for Spraying Pesticides |
Juni Khyat |
2278-4632 |
UGC Care1 |
|
12 |
N Bulliraju, V Durga Rao, G Shankar Rao |
A Look at Drones Used for Fertilizer and Pesticide Spraying |
Indian Journal of Technical Education |
0971-3034 |
UGC Care1 |
|
13 |
B Srinivas, V Rambabu, B Harita |
The History of Modern Mechanical Ventilation and Its Applications in Medicine |
Indian Journal of Technical Education |
0971-3034 |
UGC Care1 |
|
14 |
G Veerendra Kumaar, Abdul Azeez, B Venkatesh |
Online Estimation Variables for the Analysis of Ground Vehicle Inertia Properties |
Journal of Management and Entrepreneurship |
2229-5348 |
UGC Care1 |
|
15 |
Saravanan M, S Surendar, Jyothi Sri |
Incorporating cutouts into composite thin circular plates drastically changes their dynamic behavior |
Juni Khyat |
2278-4632 |
UGC Care1 |
FACULTY PUBLICATIONS A.Y.2021-22
|
S. No |
Authors |
Article Title |
Journals Name |
ISSN |
SCI / Scopus/ UGC Care |
|
1 |
Dr. R. Sanjeev Kumar & Dr. A.Gopichand |
Fabrication, Microstructural and Mechanical behaviour of Al-ZrO2-TiC hybrid metal matrix Composite |
Comptes rendus de l’Acad ́emie bulgare des Sciences |
1310-1331 |
SCI |
|
2 |
Dr. R.Sanjeev Kumar & Dr. G.Robert Singh |
The Influence of Human hair on Kenaf and Grewia fiber based hybrid natural composite material |
Functional Composites and Structures |
2631-6331 |
SCI |
|
3 |
Dr. M. Francis Luther King |
Optimizing GMAW parameters to achieve high impact strength of the dissimilar weld joints using Taguchi approach |
Materials Today: Proceedings |
2214-7853 |
Scopus |
|
4 |
P Satyanarayana Raju & Dr. A Gopichand |
Design and simulation of sandwich pipes for Deepwater applications |
Wulfenia |
1561-882X |
Scopus |
|
5 |
Dr. R Lalitha Narayana, Chirapa Srinivas, Abdul Azeez |
Durability and mechanical properties of concrete maximized by partially replacing cement with wood waste ash |
Journal of Management and Entrepreneurship |
2229-5348 |
UGC Care1 |
|
6 |
Dr. Dolla Bhanu Prakash, Saravanan M, V Rambabu |
An examination of the rigidity of a three-puzzle uniaxial kinematic apparatus |
Indian Journal of Technical Education |
0971-3034 |
UGC Care1 |
|
7 |
B Srinivas, G Veerendra Kumar, Ravi Kishore L |
Thermodynamic Modeling of a Gas-Fired Power Plant's Exhaust Heat Exchanger |
Indian Journal of Technical Education |
0971-3034 |
UGC Care1 |
|
8 |
B Mahesh Krishna, D Padmavathi, S V Prasad |
By comparing their power consumption, we can evaluate the dynamic reliability of mechanical additives. The Ways of Decline |
Journal of Management and Entrepreneurship |
2229-5348 |
UGC Care1 |
|
9 |
C Harish Kumar, J Naresh babu, K Mohan Prasad |
How the aspect ratio of a serial chain is related to its condition number in a generalized inertia matrix |
Juni Khyat |
2278-4632 |
UGC Care1 |
|
10 |
N Bulliraju, P Satish, Ch Madhu Venkata Narayana |
The AA 6063 T6 aluminum alloy was turned using a large number of Reactions Taguchi L9 orthogonal arrays and Grey relational analysis. |
Indian Journal of Technical Education |
0971-3034 |
UGC Care1 |
|
11 |
John Bunyan V, B Harita, L Bosu babu |
Design optimization of mechanical parts by use of a more complex suite of optimization algorithms founded on the differential operator and based on teaching-learning |
Journal of Management and Entrepreneurship |
2229-5348 |
UGC Care1 |
FACULTY PUBLICATIONS A.Y.2020-21
|
S. No |
Authors |
Article Title |
Journals Name |
ISSN |
SCI / Scopus/ UGC Care |
|
1 |
Dr.G.Robert Singh & Dr. R. Sanjeev Kumar |
Tensile and compression behavior, microstructural characterization on Mg-3Zn-3Sn-0.7Mn alloy reinforced with SiCp prepared through powder metallurgy method |
Materials Research Express
|
2053-1591
|
SCI |
|
2 |
Dr. M. Francis Luther King |
Failure analysis of Shackle Bracket in Airbus suspension under dynamic loading conditions |
Engineering Failure Analysis
|
1350-6307
|
SCI |
|
3 |
R. Sanjeev kumar |
Design optimization of Airless Tyre - Numerical Approach |
IOP Conf. Series: Materials Science and Engineering |
1757-8981 |
Scopus |
|
4 |
Dr. Francis Luther King, Dr.G.Robert Singh, Dr. R. Sanjeev Kumar |
Hardness and Surface Scratch Resistance of Basalt/Bagasse fibre Reinforced Poly Lactic Acid Polymer Composites |
International Journal of Engineering Trends and Technology (IJETT) |
2231-5381 |
Scopus |
|
5 |
Dr. R. Lalitha Narayana, B. Srinivas, V. John Bunyan, N. Bulli Raju |
Effect of Fin Height on Performance of Passive Solar Still in Indian Coastal Conditions |
International Journal of Mechanical and Production Engineering Research and Development |
2249–6890 |
Scopus |
|
6 |
Dr. R. Lalitha Narayana, V. John Bunyan, N. Bulli Raju |
Experimental Investigation of Friction Welding on Similar Al Plate and Tube |
International Journal of Mechanical and Production Engineering Research and Development |
2249–6890 |
Scopus |